Filter
Top Products
SECTION 10—REAR SHROUD
Zoom
™
300 and Zoom
™
400 44 Part No. 1118395
SECTION 10—REAR SHROUD
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power OFF and
remove key from ignition.
REMOVING/INSTALLING THE REAR SHROUD
NOTE: For this procedure, refer to FIGURE 10.1.
REMOVING
1. Remove the seat. Refer to Removing/Installing the Seat on page 34.
2. Lift the rear shroud off of the frame post.
INSTALLING
1. Align tabs on the rear shroud with the slots (not shown in figure) in the front shroud.
2. Place rear shroud on the frame and press down slightly.
3. Install the seat. Refer to Removing/Installing the Seat on page 34.
FIGURE 10.1 - REMOVING/INSTALLING THE REAR SHROUD
Rear Shroud
Tabs
Seat Post
Frame
Rear Shroud
Tabs
Seat Post
Frame
DETAIL “B” - ZOOM 400
DETAIL “A” - ZOOM 300
Front Shroud
Front Shroud