Filter
Top Products
SECTION 12—SCOOTER ACCESSORIES
Zoom
220 48 Part No. 1125053
FIGURE 12.1 Installing/Removing the Crutch/Cane Holder
Installing/Removing the Safety Flag
NOTE: For this procedure, refer to FIGURE 12.2.
ƽ WARNING
The installation of the safety flag onto the back of the scooter seat significantly
increases the length of the scooter. When turning the scooter or swiveling the
scooter seat, it is important to take note of this increased length - otherwise, injury
and/or damage to the surrounding property may result.
Installing
1. Install the bracket into the accessory tube located on the back of the seat.
2. Install mounting knob to secure the bracket in place. Securely tighten.
3. Install safety flag into bracket.
Removing
1. Remove the safety flag from the
bracket.
2. Remove the mounting knob that
secures the bracket in place.
3. Remove the bracket from the accessory
tube located on the back of the seat.
FIGURE 12.2 Installing/Removing the
Safety Flag
Seat
Accessory Tube
Base
Hook
Crutch Cane
Holder
Mounting Knob
Seat
Accessory
Tube
Mountin
g Knob
Bracket
Safety
Flag
Seat