Filter
Top Products
SECTION 7—SEAT AND ARMS
Part No. 1125053 33 Zoom
220
NOTE: For this procedure, refer to FIGURE 7.5.
1. Slightly pull up on the seat lock lever.
NOTE: The seat locks in position at 90° intervals. The seat is locked when an audible “click” is
heard.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat in the desired position.
NOTE: Ensure that the seat is locked in position before operating the scooter.
FIGURE 7.5 - Adjusting 90° Seat Swivel - Deluxe Seat Only
Removing/Installing the Arms - Deluxe Seat Only
NOTE: For this procedure, refer to FIGURE 7.6.
Removing
1. Remove the two (2) mounting screws that secure the arm to the seat hinge.
2. Remove the arm.
3. If necessary, repeat steps 1-2 for the other arm.
Installing
NOTE: When installing the arms during set up, the four (4) mounting screws are installed on the
seat hinge for shipping purposes.
1. Install the arm on to the seat hinge and secure with the two (2) mounting screws.
2. Repeat STEPS 1-2 for the other arm.
Seat
Seat
Top View
View From Back
Seat
Lock