Filter
Top Products
11 TRANSPORTING
Part No. 1163141
53 Invacare® Leo™ Scooter
Assembling
1. Unfold tiller. Refer to Adjusting the Tiller Angle on page 41.
2. Hold the seat post and align the curved brackets on the front frame assembly with the posts on the rear frame assembly.
3. While holding the seat post, slowly pivot the front frame assembly down until the release lever locks.
4. Ensure the release lever is locked and the front and rear frame assemblies are connected.
5. Connect the main wiring harness connector.
6. Install the batteries. Refer to Refer to Removing/Installing the Batteries
on page 48.
7. Install the seat. Refer to Removing/Installing the Seat
on page 33.
8. Install the basket.