Filter
Top Products
7 SEAT AND ARMS
Part No. 1163141
39 Invacare® Leo™ Scooter
7.6 Replacing Armrest Pad
1. Remove the mounting screw and washer that secure the arm pad
to the arm.
2. Remove the old arm pad.
3. Use the mounting screw and washer to install the new arm pad.
Securely tighten.
4. If necessary, repeat STEPS 1-3 to replace the other armrest pad.
FIGURE 7.6 Replacing Armrest Pad
7.7 Adjusting Armrest Angle
1. Lift the armrest up.
2. Loosen the jam nut.
3. Rotate the screw up or down for the desired arm angle.
4. Tighten the jam nut.
5. If necessary, repeat STEPS 1-3 for the other armrest.
FIGURE 7.7 Adjusting Armrest Angle
For this procedure, refer to FIGURE 7.6.
Arm Pad
Arm
Mounting
Screw
Washer
For this procedure, refer to FIGURE 7.7.
Armrest
Screw
Jam Nut