Filter
Top Products
2 Use VMFVIEW to review the build status messages, and see what objects
need to be built.
vmfview build
7.2.5 Build Serviced Objects
1 Rebuild Tivoli ADSM for VM serviced parts.
vmfbld ppf 5654A09A {ADSM | ADSMSFS} (serviced
Use ADSM for installing on minidisks or ADSMSFS
for installing in Shared File System directories.
Note: If your software inventory disk (51D) is not
owned by the MAINT user ID then make sure the
VMSESE PROFILE reflects the correct owning
user ID.
2 Review the build message log ($VMFBLD $MSGLOG). If necessary, correct
any problems before going on. For information about handling specific error
messages, see VM/ESA: System Messages and Codes, or use on-line HELP.
vmfview build
7.2.6 Place the New Tivoli ADSM for VM Service into Production
1 Copy the serviced files from the test BUILD disk onto the production BUILD
disk using VMFCOPY.
access 4e2 e
access 491 f
vmfcopy * * e = = f1 (prodid 5654A09A%ADSM olddate replace
4E2 is the test BUILD disk where the production
files were updated by the service.
491 is the production BUILD disk where the
production files must be copied to.
VMFCOPY is used to copy the production files
since it will update the VMSES PARTCAT file on
the 491 disk.
34 Tivoli ADSM for VM Program Directory