Filter
Top Products
– 8 –
Fig. 6
MEMORY — WELL TEMPERATURE CONTROLLER
The display case is now programmed, the temperature setting is stored in memory. The
programmed temperature setting remains in memory until reprogrammed by the operator, even
in the event of power interruption, disconnection or shutdown.
PROGRAMMING THE WELL TEMPERATURE CONTROLLER (Figs. 6, 7)
1. Press the Set key to display the well
temperature set point (Fig. 6).
2. Quickly press Up or Down (Fig. 7) to adjust the setting (temperature range is
149 to 185°F).
• After 3 seconds, the actual well temperature (not the set point) is displayed.
• The heater output indicator will light as the unit preheats (Fig. 7).
Fig. 7