Filter
Top Products
– 11 –
MAINTENANCE
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
WARNING: THE DELI DISPLAY CASE AND ITS PARTS ARE HOT. USE CARE WHEN
OPERATING, CLEANING AND SERVICING THE DELI DISPLAY CASE.
Service, Parts and Information
Contact your local Hobart service office for any repairs or adjustments needed on this equipment.
Long-term service contracts are available on this and other Hobart products (1-888-4HOBART).
Cleaning the Exterior
CAUTION: Excessive water and harsh cleaners will damage the control panel.
1. Clean the control panel with a sponge or soft cloth.
2. Clean the exterior of the display case with a solution of warm water and detergent and a soft
cloth or sponge. Rinse thoroughly and wipe dry with a soft cloth.
GUIDELINES FOR MAINTAINING STAINLESS STEEL SURFACES
There are three basic things that can break down the surface layer of stainless steel and allow
corrosion to develop: 1) Abrasion; 2) Deposits and Water and 3) Chlorides.
Avoid abrasion from rubbing with steel pads, wire brushes or scrapers that can leave iron
deposits on stainless steel; instead, use plastic scouring pads or soft cloths. For stubborn stains,
use products such as Cameo, Talc or Zud First Impression. Always rub parallel to the polish lines
or with the grain.
Hard water can leave deposits that promote rust on stainless steel. Treated water from softeners
or certain filters can eliminate these mineral deposits. Deposits from food must be properly
removed by cleaning. Use mild detergent and nonchloride cleaners. Rinse thoroughly. Wipe dry.
If using chloride-containing cleaners or sanitizers,
rinse repeatedly
to avoid stainless steel
corrosion. Where appropriate, apply a polish recommended for stainless steel (such as Benefit
or Super Sheen) for extra protection and luster.