Hobart hhtc4 Pill Reminder Device User Manual


  Open as PDF
of 12
 
– 12 –
FORM 35501 (July 2003) PRINTED IN U. S. A.
TROUBLESHOOTING
Problem Possible Cause
Will not operate. 1. Check incoming power.
Controller is blank. 2. Check fuses. Replace with same size and type.
3. Turn on the Main Power Switch.
4. Turn on the Lower Heat switch.
5. Call Hobart Service.
Controller displays --- or EEE. Call Hobart Service.
No well heat. 1. Check incoming power.
2. Check fuses. Replace with same size and type.
3. Turn on the Main Power switch.
4. Turn on the Lower Heat switch.
5. Call Hobart Service.
No upper heat. 1. Turn on the Upper Heat switch.
2. Call Hobart Service.
Lights not on, 1. Turn on the Light switch.
controller is functioning. 2. Check fuse. Replace with same size and type.
3. Call Hobart Service.
 previous