Filter
Top Products
60
• To store another frozen value, press
to return to normal logging mode and then again.
• The records will be stored in one lot. In order to change the logging lot, see the measured unit
Setup
for
details, Log option, New Lot generation.
LOGGING MODE 5
This logging mode can be used for multiple samples measurement. By choosing this logging mode,
and will be available in
Measure
mode.
Notes: • For HI 4222, the
or and or will be available in multichannel
Measure
mode, depending on the focused channel.
• If the Reading Mode option is set as Direct and the Logging Mode 5 session is started, a warning
pop-up will be displayed on the LCD, informing the user that the Reading Mode option must be
set as Direct/AutoHold in order to use this logging mode.
To log data using this mode:
• Press while in
Measure
mode to start the logging session. The logged values are only the ones
frozen on the LCD, after
was pressed and the stability criterion reached.
• To store another frozen value, press
to return to normal logging mode and then again.
• To stop the logging session, press or / .
Notes: • For the automatic logging, if the maximum logging time (24h) has been reached, a warning pop-
up will be displayed on the LCD in order to stop the current log and start another one in a new lot.
• If 100 lots have been saved or maximum 5000 records have been manually stored, a warning
pop-up will be displayed on the LCD in order to delete one lot or to select a new lot for the
manual logging to log other records.
LOG RECALL
This feature allows the user to view all stored data. If no data were
logged, the “No records were found” message will be displayed on
the LCD in the Log Recall screen. Otherwise, the instrument will
display all the memorized lots in accordance with the selected option:
Automatic Log, Manual Log or ISE Method Report (HI 4222 only).
To view the memorized data:
• Press
while in
Measure
mode.
• Press
. The “Choose Log Report Type” message will
be displayed in the Reminder messages area.