Filter
Top Products
28
To set the Logging Data Configuration:
• Press
while in
pH Measure
mode.
• Press
.
• Use or to select the Log option.
• Press
and use or to highlight the
Logging Data Configuration option.
• Press
and use or to highlight the desired
parameter to be logged in file.
• Press
to confirm your selection and use or
to enable the parameter by selecting Yes or to disable
it by selecting No.
• Press
to confirm your selection or press
to cancel operation.
Sampling Period
This option allows the user to select the desired sampling period for automatic logging type.
To set the Sampling Period:
• Press while in
pH Measure
mode.
• Press
.
• Use
or to select the Log option.
• Press
and use or to highlight the
Sampling Period option.
• Press
and use or to select the desired
option.
• Press
to confirm your selection or press to
cancel operation.
New Lot
Accessing this option, a new manual lot can be generated next time you want to manually log a measured value.
Note: If New Lot option is accessed and the Logging Type is Automatic, a warning message appears on the LCD
informing the user that a new lot can be created only if the Logging Type is set as Manual.
To generate a New Lot:
• Press
while in
pH Measure
mode.
• Press
.