Filter
Top Products
Changing Hydraulic Oil
8 3A1696C
Changing Hydraulic Oil
Drain Oil
1. Use a funnel to drain oil into a drain pan. If a funnel
is not available, remove the gas tank and place a
drain pan under the oil tank.
2. Unscrew reservoir drain plug (126e) and drain oil
from reservoir.
Refilling Oil
1. Replace drain plug (126e).
2. Fill tank with Graco hydraulic oil, ISO 46.
NOTE: Tank holds approximately 4 gallons. Check
dipstick to ensure oil level is at an acceptable level.
3. Replace gas tank if removed.
4. Run the unit and recheck hydraulic oil level. Add oil
if necessary.
ti16781a
126e
(cold)
ti16447a