Filter
Top Products
Compressor Belt and Hydraulic Pump Belt
10 3A1696C
7. Remove eight screws from side guard (105) and
remove guard.
8. Remove two screws from engine muffler bracket.
9. Loosen four nuts (5) and bolts (3) which secure
engine to relieve tension on hydraulic pump belt.
10. Tilt engine back and remove hydraulic pump belt
(103). Loop belt around the cooling fan.
11. If installing a new compressor belt, remove com-
pressor belt (102).
Belt Installation
1. Install new compressor belt (102) if necessary.
2. Install hydraulic pump belt (103).
3. Make sure compressor belt (102) is looped around
the engine groove, idler pulley and compressor pul-
ley.
ti17368a
105
ti17361a
ti17365a
5
3
ti17362a
102
ti17363a
103
ti17362a
102