Filter
Top Products
Engine Replacement
3A1696C 17
Pulley Installation
1. Position new pulley on engine.
2. Install bolt (19), washer (4), and lock washer (20) in
center of pulley. Torque to 125 +/- 10 in-lb (14.1 +/-
1.1 N•m).
3. Tighten set screw (21). Torque to 60 +/- 2 in-lb (25.4
N•m).
Engine Installation
1. Use a lift ring to turn the engine and insert it into the
frame.
2. Connect ground wire and hand-tighten four bolts (3)
into engine.
3. Replace belts, see Compressor Belt and Hydrau-
lic Pump Belt Replacement, page 9.
4. Connect evaporation line (261) and connect gas line
(260).
5. Connect positive red wire (90) to engine.
6. Connect yellow and white electrical wires behind
muffler.
7. Connect positive terminal of battery, then connect
ground terminal.
ti17384a
3
ti17379a
260
ti17380a
90
ti17381a