Filter
Top Products
Engine Replacement
16 3A1696C
Engine Replacement
Engine Removal
1. Perform Pressure Relief Procedure, page 7.
2. Disconnect ground terminal of battery, then dis-
connect the positive terminal.
3. Disconnect white and yellow electrical wires located
behind muffler.
4. Disconnect the positive red wire (90) attached to the
engine.
5. Disconnect gas line (260) and the evaporation line
(261) from the engine.
6. Remove belts, see Compressor Belt and Hydrau-
lic Pump Belt Replacement, page 9.
7. Remove four bolts (3) from the engine (which will
also disconnect the ground wire).
8. Use a lift ring to lift and turn the engine (83) to
remove it from the frame. See engine manual for lift
locations.
Pulley Removal
1. Loosen set screw (21) located on the side of the
pulley.
2. Remove bolt (19) in the center of pulley.
3. Remove pulley from engine
ti17381a
83
ti17380a
90
ti17379a
260
ti17384a
3
ti17382a
21
ti17383a
19