Filter
Top Products
Compressor Replacement
3A1696C 15
Installation
1. Apply high temperature thread sealant to threads of
relief valve and screw in relief valve to new air com-
pressor.
2. Hand-tighten four bolts (12) and nuts (5) to hold
compressor (100) and belt guard (101) to frame.
3. Loop compressor belt (102) onto idler pulley, engine
pulley, and compressor pulley. NOTE: Make sure
belt is in the proper track.
4. Tighten four nuts (5) and bolts (12) so that compres-
sor is fairly level. Before completely tightening the
bolts, tension compressor belt (102) by shifting
compressor to the right.
5. Tighten four nuts (5) and bolts (12) to secure com-
pressor.
6. Install top belt guard (108) by tightening four screws
(1) and two nuts (15).
7. Install air line (145) to compressor.
ti17378a
ti17370a
ti17486a
ti16829a
12
108
ti17366a
145