Filter
Top Products
Compressor Belt and Hydraulic Pump Belt
3A1696C 11
4. Visually inspect and make sure belts will be properly
lined up when engine is tightened.
5. Tighten four nuts (5) and bolts (3) to secure engine
in place. Visually inspect and make sure hydraulic
belt is properly aligned. Repeat until proper align-
ment is achieved.
6. Tighten four nuts (5) and bolts (12) so compressor
is fairly level. Before completely tightening bolts,
tension compressor belt (102) by shifting compres-
sor to the right.
7. Tighten four nuts (5) and bolts (12) to secure com-
pressor in place.
8. Install two screws securing muffler bracket to
engine.
9. Install side guard (105) by tightening eight screws.
10. Install top fan guard (104) by tightening four bolts
(14) and nuts (15).
11. Install front belt guard (107) by tightening three
screws (1) and two nuts (15) and bolts (22).
12. Install top belt guard (108) by tightening four screws
(1) and two nuts (15).
13. Install the air line (145) to the compressor.
ti17365a
5
3
ti17370a
ti17370a
ti17370a
ti17361a
ti17368a
105
ti17367a
14
15
15
104
ti16828a
15
22
107
ti16828a
ti16829a
1
1
108
ti17366a
145