Filter
Top Products
CONAIR
MARTIN
05-15-96 79 7
4. Safety regulations
4.1 Overview
CONAIR MARTIN granulators are built for granulation of injection moulded,
blow moulded or extruded plastic waste, which must not exceed the
granulator's size and performance as described in chapter 2.
The granulator is equipped with safety switches to prevent the front door and
the hopper from being opened during operation. The following safety measures
should always be observed when handling the granulator:
• WARNING! High Voltage! The electrical installation work must only
be carried out by authorised personnel!
• Always switch off the power supply using the main circuit-breaker (on
top of the electrical cabinet) before opening the granulator.
WARNING! High voltage remains on the incoming phase's connection
block and up to the main circuit-breaker!
• Never put any part of your body into any openings on the granulator
unless the main circuit-breaker is in the "OFF" (=0) position.
• Always be careful when the knives are in reach since they are very
sharp. When the rotor has to be rotated manually, this must be done
with the greatest care!
• Be careful when the hopper and screenbox are opened and closed so
that no part of your body gets caught.
• The granulator cannot be started until the screenbox and the hopper
are locked.
= WARNING! High Voltage!
This sign is placed on the electrical cabinet's door and any connection boxes.
= WARNING! Risk of being cut or caught in the machinery!
This sign is placed as necessary next to dangerous parts, for example the
hopper and screenbox.
As long as the instructions in this manual are followed carefully, there should be
no other dangers.