Filter
Top Products
English
— Eng 5 —
5. Clock Minute Correcting State
q Press the time setting switch until the
correct value of the minute is indi-
cated.
(Each time the time setting switch is
pressed, the value of the minute is
increased by one. The value of the
minute can be corrected in only the
forward direction. It can be corrected
quickly by keeping the time setting
switch pressed.)
w To correct the clock hour, press the time correcting switch,
and the meter is set to the clock hour correcting state.
e Press the mode switch to finish correction.
6. Clock Hour Correcting State
q Press the time setting switch until the
correct value of the hour is indicated.
(Each time the time setting switch is
pressed, the value of the hour is in-
creased by one. The value of the hour
can be corrected in only the forward
direction. It can be corrected quickly
by keeping the time setting switch
pressed.)
w To correct the year, press the time correcting switch, and
the meter is set to the year correcting state.
e Press the mode switch to finish correction.
7. Year Correcting State
q Press the time setting switch until the
correct value of the year is indicated.
(Each time the time setting switch is
pressed, the value of the year is in-
creased by one. The value of the year
can be corrected in only the forward
direction. It is increased from 1998 to
2097, then set to 1998 again. It can
be corrected quickly by keeping the
time setting switch pressed.)
w To correct the month, press the time correcting switch,
and the meter is set to the month correcting state.
e Press the mode switch to finish correction.
8. Month Correcting State
q Press the time setting switch until the correct value of
the month is indicated.
(Each time the time setting switch is pressed, the value
of the month is increased by one. The value of the month
can be corrected in only the forward
direction. It can be corrected quickly
by keeping the time setting switch
pressed.)
w To correct the day, press the time cor-
recting switch, and the meter is set to
the day correcting state.
e Press the mode switch to finish cor-
rection.
9. Day Correcting State
q Press the time setting switch until the
correct value of the day is indicated.
(Each time the time setting switch is
pressed, the value of the day is in-
creased by one. The value of the day
can be corrected in only the forward
direction. It can be corrected quickly
by keeping the time setting switch
pressed.)
w To correct the 12/24-hour, press the time correcting
switch, and the meter is set to the 12/24-hour correcting
state.
e Press the mode switch to finish correction.
10. 12/24-hour System Correcting State
q Press the time setting switch to select
12-hour or 24-hour system.
(If the time setting switch is pressed,
system which is not currently selected
starts flashing.)
w Press the mode switch or time correct-
ing switch to finish correction. The
meter is set to the time indicating
state.
11. Turning ON/OFF the Alarm
q If the time setting switch is pressed while the bell mark
(alarm) is turned off, the set alarm time is indicated for
0.5 seconds, then the bell mark lights up.
Time
setting
switch
0.5 seconds
Time
setting
switch