
— Eng 4 —
CLOCK MODE
Manufacturer:
Name: Premier Precision Ltd.
Address: Block E, G-H, 6
th
floor, Phase 2, Yip Fat
Factory Building,
73-75 Hoi Yuen Road, Kwun Tong, Kowloon,
Hong Kong
1. Default Time Indicating State and
Selection of Each Mode
• When the battery is installed, the time,
date and alarm are set as follows.
Date and time : January 1 1998,
12:00:00 AM
(12-hour system is selected)
Alarm : 12:00 AM (Turned off)
• Each time the time setting switch is
pressed, the alarm is turn ON or OFF
(See 11).
• If the mode switch is pressed, the meter is set to the 0
take-in state in the blood pressure meter mode.
• The alarm works only in the time indicating state.
• If the time correcting switch is pressed for approx. one
second, the meter is set to the alarm minute correcting
state.
2. Alarm Minute Correcting State
q Press the time setting switch until the
correct value of the minute is indi-
cated.
(Each time the time setting switch is
pressed, the value of the minute is in-
creased by one. The value of the
minute can be corrected in only the
forward direction. It can be corrected
quickly by keeping the time setting
switch pressed.)
w To correct the alarm hour, press the time correcting
switch, and the meter is set to the alarm hour correcting
state.
e Press the mode switch to finish correction.
3. Alarm Hour Correcting State
q Press the time setting switch until the
correct value of the hour is indicated.
(Each time the time setting switch is
pressed, the value of the hour is in-
creased by one. The value of the hour
can be corrected in only the forward
direction. It can be corrected quickly
by keeping the time setting switch
pressed.)
w To correct the clock second, press the time correcting
switch, and the meter is set to the clock second correct-
ing state.
e Press the mode switch to finish correction.
4. Clock Second Correcting State
q When the time signal of 00 second
sounds, press the time setting switch
to set the second to 00.
(If a value between 30 seconds and
59 seconds is corrected, the value of
the minute is increased by one. If a
value between 0 second and 29 sec-
onds is corrected, the value of the
minute is not changed.)
w To correct the clock minute, press the time correcting
switch, and the meter is set to the clock minute correct-
ing state.
e Press the mode switch to finish correction.
European Representative:
Name: WvW elektronische Geräte Vertrieb GmbH.
Address: Robert-Koch-Straße 20, D-80538 München,
GERMANY