- Eng 9 -
English
• Replace the batteries with two new “AAA” alkaline batteries when appears
on the display, or when nothing appears on the display when the POWER
switch is pressed.
• Be sure to replace both batteries with new ones.
• Use the commercial alkaline dry cells. Do not use rechargeable batteries.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than specified.
• Dispose of used batteries properly in accordance with local regulations.
Replacing the batteries
HOW TO UNLOAD BATTERIES
HOW TO UNLOAD BATTERIES
1
Pull the battery box to remove from
the unit.
( See page 8 “HOW TO LOAD BATTERIES”.)
2
Push up each battery by lifting up its
positive + end side with your
fingertip.
* Use caution when removing batteries that are held
in place by the springs in the battery box. Failure
to do so may cause injury to your fingernail.
3
Re-attach the battery box to the unit.
( See page 8 “HOW TO LOAD BATTERIES”.)
