Filter
Top Products
- Eng 8 -
HOW TO LOAD BATTERIES
Push
Push
Remove the battery box from the unit. Install two “AAA” alkaline
batteries, observing the proper battery polarity (“+/–”).
1
While pinching the stopper
tabs, pull the battery box in the
direction of the arrow to
remove from the unit.
2
Insert the batteries into the
battery box, ensuring a correct
match with positive + and –
negative terminals.
* The battery goes in negative – side first.
3
Re-attach the battery box to the
unit with the battery’s visible
side facing up.
* Make sure not to depress the switch when
you re-attach the battery box into the main
unit.
* Install the battery box properly. Improper
installation may prevent proper display
when the is pressed.
* After replacing the batteries, be sure to set the
clock.
( See page 10
“HOW TO SET THE CLOCK”.)
* The data in memory is kept after the batteries are replaced.