Filter
Top Products
- Eng 20 -
DESCRIPTION OF DISPLAY MARKS
DISPLAY MARK CONDITION / CAUSE CORRECTIVE ACTION
Measurement is begun, but the
pressure was insufficient.
Repeat measurement again.
Appears when the blood pres-
sure could not be measured ac-
curately. (Some noises were
detected by the movement of
arm during measurement.)
Repeat measurement again.
First, exhaust air from the cuff,
reapply the cuff properly and
remeasure.
Appears when the pulse could
not be measured.
Appears when batteries be-
come weak.
Replace the batteries.
Device has a trouble. Ask purchased shop.