Filter
Top Products
- Eng 10 -
11. Changeover of the “time system”
● After the completion of the day-of-the-month correction as de-
scribed above, press “SELECT” switch to place the unit in the
time system selection state.
● Every time “SET” switch is pressed, the 12-hour system (12H)
and 24-hour system (24H) will be changed over.
● Press “SELECT” switch after activating the time system indica-
tion on the display to revert the display to the time indication.
This completes the clock setting procedure.
12. How to set the alarm
● While alarm symbol “bell” is shown on the display, the alarm will sound for 30 seconds when
the alarm time is reached. The alarm sounds only when the time indication is shown on the
display.
● To stop the alarm, press any switch.
● To change over the alarm status between SET/RELEASE, press “SET” switch while the time
indication is shown on the display.
Time indication
(without alarm)
Alarm time indication
Time indication
(with alarm)