Braun Toothbrush Electric Toothbrush User Manual


 
8
In the first few days of using any electric
toothbrush, your gums may bleed slightly.
This is usually a sign of pre-existing gum
inflammation. Using your Oral-B Triumph
toothbrush properly should reduce inflammation
and as a result bleeding should stop after a few
days. Should it persist after 2 weeks, please
consult your dentist or hygienist. If you have
sensitive teeth and gums, Oral-B recommends
using the «sensitive» mode.
Brushheads
The Oral-B FlossAction brushhead (a) is
recommended for everyday deep cleaning.
For occasional or everyday polishing, use the
Oral-B Pro White (j) brushhead (not with all
models). Please note: children under 12 should
not use the Oral-B Pro White brushhead.
Both brushheads contain a «smart chip» to
communicate with the electronics inside the
toothbrush handle. Therefore, your toothbrush
automatically switches to the appropriate
brushing mode for the attached brushhead.
Nevertheless, you can select other brushing
modes to customize your routine.
Do not use these brushheads with braces. We
recommend using the Oral-B Ortho brushhead,
which is specifically designed to clean around
braces and wires.
SmartGuide display unit
Icons
«Clean» mode
«Sensitive» mode
«Massage» mode
«Polish» mode (not with all
models)
Too much pressure is applied.
Reduce the brushing force.
«Quadrant circle» – currently you
are brushing in the first 30-second
interval. Move to the next quadrant
of your mouth, when the second
segment starts flashing.
Dentist recommended 2-minute
brushing time has been reached.
*
«Pre-notice» – that your
brushhead needs to be replaced
soon. You can use it for another
10 days (twice a day, 2 minutes)
before the recommended
replacement time has been
reached.
*
Your brushhead has surpassed
the dentist recommended usage
time of 3 months (twice a day,
2 minutes). Replace it with a new
one.
The rechargeable battery of the
handle is low. Charge the tooth-
brush handle.
Batteries of the SmartGuide
display unit are low. Change
batteries of the display unit.
* the «brushhead replacement» and «pre-notice
brushhead replacement» features only work
when using brushheads enabled with Smart
Technology (Oral-B FlossAction and
Oral-B Pro White)
Wall mount
If you prefer to mount the SmartGuide display
unit on a wall, mirror or other surface, use
the adhesive tape (m) to fix the wall mount.
Before doing so, make sure the chosen surface
is clean and dry (remove grease and dust first).
Position the wall mount so that the Oral-B logo
is readable. Then press the wall mount evenly
and firmly to the wall. Wait 24h before sliding the
SmartGuide display unit into the fixed wall
mount.
aa
jj
3738161_D30_NA.indd 83738161_D30_NA.indd 8 15.05.2007 15:00:08 Uhr15.05.2007 15:00:08 Uhr