Filter
Top Products
3
www.bayerdiabetes.com/us
Important
CONTOUR TS Meter Display:
A full display, as shown below, indicates that all characters in the
display are working properly. You will briefl y see this display each
time you turn the meter on. You can see the complete display when
the meter is off by pressing and holding the
button. Compare your
meter to the display shown below.
While all characters are displayed, it is most important to
verify that is fully displayed. If there is a difference,
see Error Codes and Symbols (page 25). This may affect the
way you see your results.
or
Displays the
date format.
or will
appear if the meter
is in 12 hour setup.
CONTOUR TS Meter Display
14 day
average.
Control result
marker.
Indicates
the meter is
ready to test.
Indicates the
battery is low
and needs to be
changed.
Results are
displayed as
either mg/dL
or mmol/L.
Beeper on/off
indicator.
Indicates it is too cold or
too hot for your meter
to test accurately.
Center area on the display
that shows either your test
result or any error codes.
Bottom area on
the display show-
ing date and time.