Filter
Top Products
16
Testing
Need Help? Call toll free: 1-800-348-8100
Gently rock the control bottle
before opening to ensure it is
mixed well.
Squeeze a small drop of control
solution on a clean non-
absorbent surface, such as a
piece of wax paper.
Do not apply control solution
to the test strip directly from
the bottle.
Replace the cap on the control
solution bottle.
Testing with a Control Solution
Immediately touch the tip of the
test strip to the drop of control
solution. The solution is pulled
into the test strip through the tip.
Hold it in the drop until the
meter beeps.
After the beep, you will see the
meter count down eight seconds
until the test is complete and
your control test result is
displayed.