Filter
Top Products
CHAPTER
Blood Glucose Test 3
76
CHAPTER
3 Blood Glucose Test
Materials Needed:
Microlet™ Device with Endcap
Glucolanz™ Lancet
Prepare for the Finger Puncture
4. Wash your hands with
warm soapy water. Rinse and
dry thoroughly.
1. Remove the endcap.
3. Replace the endcap.
2. Insert lancet firmly until
the lancet comes to a full stop
— then twist off lancet cap.
NOTE: See Microlet package
insert for complete instructions.
➠
1. To enter the Test Mode,
move Pad left and hold
while moving the Slide for-
ward. Be sure Slide is
moved all the way to the
end. A Test Sensor appears
and the display prompts
blood application with a
flashing drop .
If a Programme Number (P1 to P62) appears, press Button
B to change (if needed) and then Button A to continue. If no
change press Button A to prompt blood application.
Programme Number appears in display if Meter has been
opened since last used.
Materials Needed:
Meter with
Test Sensor
Disc inserted
Before running a test, be sure:
• The Test Sensor Disc is inserted. See page 1.
• The date and time are set (if you want correct date or
time stored in memory with test result). See page 14.
2. Prick your finger with
the Microlet Device and
form a small drop of blood.
➠
➠