Filter
Top Products
CHAPTER
Reset Time-Specific Averages 7
17
5. Press and release
Button A. The hour flashes.
Then press Button B to
change the hour.
6. Press and release
Button A again and move
to A2Average.
Press Button B to change
the minute. If you want to
continue changes for A 2,
A 3 and A 4, repeat steps
5 through 6. Then move
Slide back to turn Meter off.
If you only want to change
a specific time(s), press
Button A repeatedly to
scroll to that display.
16
CHAPTER
7 Reset Time-Specific Averages
The Meter calculates four time-specific averages
identified as A1, A2, A3,and A4. These times are
preset for meal times but may be changed to meet
your schedule. To be included in the average, the
testing time must occur within one hour before or
after the specific set time.
The preset times are:
A 3 1 8 : 00
A 4 2 1 : 00
A 1 6 : 00
A 2 12 : 00
PROCEDURE:
1. Move Slide forward to
enter Features Mode.
2. Press and release
Button A. Average dis-
plays if three test results
have been stored.
Press and hold Button A
until
number of remaining
sensors
appears. Press and
release Button A—time
appears.
4. Press Button B to
change the minute for the
A 1 Time-Specific Average.
3. Press and hold Button
A until A 1 appears.
Release Button A. The
minute flashes.
➠