Filter
Top Products
Help
18
Need Help? Call: 0845 600 6030 (UK)/1 890 920 111 (Ireland)
www.ascensia.co.uk
Control Solution Testing:
Control Solution Testing
Use Ascensia MICROFILL Control
Solutions to practice on the sys-
tem or to run a check to make
sure the meter and the test
strips are working properly.
Using another control solution
could present incorrect results.
Remove a test strip from the
bottle. Tightly close the bottle
lid immediately after you have
removed the test strip.
NOTE: Check the expiry and dis-
card date. Make sure the test
strip does not appear torn or
damaged.
Hold the test strip with the
grey end facing up.
Insert the grey end into the test
strip port on the meter.
The meter will turn on. A test
strip with a fl ashing blood drop
will appear letting you know the
meter is ready to test.