Filter
Top Products
SECTION
Important to Remember 7
15
DON’T FORGET—when using the Meter:
• Insert the Check Strip, Code Strip or Test Strip with a firm
motion until it comes to a full stop.
• The tab on the strip can no longer be seen if the Test Strip has
been inserted fully into the Meter.
• The Meter turns off automatically after 3 minutes if strip is left
in the Meter.
• The Code Number (F#) appearing in the Display must
match the number appearing on the:
----- Code Strip
----- Code Strip packet
----- Back of Test Strip packet
• To mark your Control Test at the beginning or end of the test
(before removing Test Strip from the Meter). The “marking”
prevents the Control Test result from being averaged with the
blood glucose test results.
• You can recall all stored test results, which includes Control
Tests and deleted tests.