Filter
Top Products
SECTION
Control Test 5
9
Take the Test:
5. Squeeze a small drop of Control
Solution onto the inside of the
foil packet you saved.
6. Touch and hold the TEST END of
the Test Strip to the drop until the
Meter beeps (the Control Solution
has now been drawn into the
Test Strip). The timer begins to
count down from 29 seconds.
The test result appears with
“CONT” in the display (if marked)
when the countdown is com-
plete.
Compare result to range on
end flap of Test Strip carton.
7. If you did not mark control in #4
or want to delete the test result,
see page 10—if you did mark
and do not want to delete,
record the test result/date in
your Clinilog Diary.
8.
Remove the Test Strip. The Meter
turns off and the result is stored
as a Control.