Filter
Top Products
SECTION
6 Blood Glucose Test
12
You need a Meter and Test Strip.
Take the Test:
1. After washing your hands with
warm soapy water and drying
thoroughly, open a foil packet
and remove the Test Strip.
2. With the Meter off, hold the
round end and insert the Test
Strip fully into the Meter. You
will hear a beep.
2. After a full display, the Code
Number (F#) and previous test
result begin flashing alternately.
3. Press Microlet firmly against
puncture site and push button
to release. Form a small, round
drop of blood.