Filter
Top Products
Advanced 32
Luminance uniformity
This menu allows you to calibrate the display, including the
Luminance Uniformity circuit.
Proceed as follows:
1 Connect the X-Rite DTP92 sensor and apply the black shield (see
chapter "Installation").
2 Follow the instructions on the screen.
Factory reset
This function allows you to undo all adjustments you have made since
the display left the factory.
Select Go ahead to restore the factory settings.
Select Exit to return to the previous menu without erasing the
adjustments.
c) How to save changes
Proceed as follows:
1 After having made the adjustments, select Exit in each appearing
menu until the Save Changes? message appears.
2 Select Yes to save the changes.
Select No to exit the OSD menus without saving the changes.
What happens upon saving?
When the current scanning mode was already stored in the display
memory, the scanning mode is updated with the new adjustment
values.
When the scanning mode was not yet stored in the memory, the
display will create a new scanning mode in the memory.
However, when the memory was full, the monitor will display a list
of scanning modes in the memory and ask if you wish to overwrite
one of them. If you want to store the adjustments you have made,
you will have to overwrite one of the scanning modes in memory.