Filter
Top Products
Advanced 27
Interlacing - Pre correction
In most cases you do not need to change this adjustment.
You may need to increase this adjustment only when the connected
video and sync signal contains an abnormally big number of
equalization pulses before the vertical sync (more than 8 lines),
resulting in a phase error (geometry distortion) at the bottom of the
image.
Interlacing - Post correction
In most cases you do not need to change this adjustment.
You may need to increase this adjustment only when the connected
video and sync signal contains an abnormally big number of
equalization pulses after the vertical sync (more than 8 lines),
resulting in a phase error (geometry distortion) at the top of the image.
SH Compensation (optional)
If your display is equipped with the Southern Hemisphere option, the
on-screen display menu contains additional functions to adjust the
image geometry. If the option is not installed in the display, this menu
does not appear.
SH Compensation - SH Compensation ON/OFF
For proper geometry adjustment in the Southern Hemisphere, you
must switch SH Compensation ON. If not, the SH controls will not
function.
SH Compensation: SH Top
SH Compensation: SH Bottom