Filter
Top Products
Advanced 23
4. ADVANCED SETTINGS AND
ADJUSTMENTS
(FOR SERVICE STAFF ONLY)
Important:
The functions and controls described in this chapter can have a
serious impact on the performance of the display. They should be
touched by trained service staff only!
4.1 Settings
SETTINGS INFORMATION
- LUC OFF
- ALC OFF
- Orbiter OFF
- Power save ON
- Display address 1
- User controls disable OFF
- Exit
The Settings menu
To change the settings
1 Turn the control knob at the rear from left to right or from right to
left to activate the On-Screen Display (OSD) main menu.
2 In the main menu, turn the control knob to select Settings.
3 Press and hold the control knob for a few seconds.
The Settings menu appears. It displays each setting and its current
status.
Note: If you press only shortly, the message "Service protected"
appears.
4 Turn the control knob to select the setting you want to change.
5 Press the control knob shortly to change the selected setting.
6 For Display address, you can change the setting by turning the
control knob. Return to the Settings menu by pressing the control
knob.
For the other settings, the new status instantly appears in the
Settings menu.