Filter
Top Products
Installation
Rack Side Air Distribution Unit 5
Air-turning vane configurations
The Rack Side Air Distribution Unit is configured at the factory to discharge air out the right side of
the unit. Check your product airflow needs and, if necessary, adjust the air-turning vane configuration
during the installation procedure.
Change the air discharge to the left side of the unit.
1. Remove the air discharge plate by
removing the two screws.
2. Install the discharge plate on the right
side of the fan assembly.
3. Install the air-turning vane on the left side of the fan assembly.
Left Right
Up
Down
See “Assemble the air-turning vane to the mounting rail” on page 6 for instructions
on how to install the turning vane.