APC ACF202BLK Microscope & Magnifier User Manual


 
General Information
2 Rack Side Air Distribution Unit
Safety information
Warning
Read and save this manual. This manual contains important safety instructions
for the proper installation and use of this product.
Disconnect power to the enclosure before installing the Rack Side Air
Distribution Unit. Failure to do so may result in personal injury or damage to
equipment.
Do not apply power to the unit until the installation is complete. The Rack Side
Air Distribution Unit contains moving parts, which are potentially hazardous
when operated outside of the enclosure.
Keep fingers and clothing away from the fans. When power is applied, they have
moving parts which can cause personal injury.
Do not attempt to move a heavily loaded enclosure by yourself. Doing so
introduces risk of injury due to muscle strain or the tipping of the enclosure.
Fully loaded enclosures require at least two people to move safely.
Check that the power cord plugs and sockets are in good condition before
installation.
Connect the Rack Side Air Distribution Unit to a IEC-320-C13 outlet.
Connection to any other type of outlet may result in a shock hazard. Each outlet
must be connected to appropriate branch circuit/mains protection (fuse or circuit
breaker).
This equipment contains hazardous voltages. Do not attempt to disassemble or
modify the unit.
Always install and operate the Rack Side Air Distribution Unit as shown in this
manual.