Filter
Top Products
Operation
14 Rack Side Air Distribution Unit
Start-Up and fan test
1. Apply power to Fan 1 by pressing the corresponding switch on the rear of the unit.
2. Listen for the fan to start running and check the fan LED on the front panel. The LED is green
during normal fan operation.
3. Turn off Fan 1, and repeat steps 1 and 2 for Fan 2.
Warning
Before applying power to the Rack Side Air Distribution Unit, remove any debris
that may be located in or near the fan rotors. Failure to remove debris can result
in damage to equipment or cause bodily harm.
• This unit has no serviceable parts.
• Never operate the Rack Side Air Distribution Unit with its covers removed.
• Do not operate the fan unit in the extended position.