Filter
Top Products
Rack Side Air Distribution Unit 13
Operation
Features and controls
The Rack Side Air Distribution Unit has two LEDs on the front that indicate the status of the fans.
Each fan is controlled by a switch located on the back of the unit. Each line is protected by a separate
circuit breaker.
LED fan status
Fan power switches, dual inputs, and circuit breaker locations
Fan designation
Warning
Before applying power to the Rack Side Air Distribution Unit, make sure any
debris is removed from the fan intake and fan exhaust areas. Failure to remove
debris can result in damage to equipment or cause bodily harm.
LED color Fan Status
Green Receiving power and running
Red Receiving power and not running
None No power
Fan number Air flow exhaust location
Fan 1 Side of unit—front half
Fan 2 Side of unit—back half
Automatic
Input:
200-240 VAC
50/60 Hz
0.75 A
Off
On
885-0476
Fan 1
Front
Off
On
Fan 2
Back
Input A: Primary Input B: Alternate
Push to Reset
Switch
Fan power switches
Circuit
breakers
Dual inputs