Filter
Top Products
Installation
12 Rack Side Air Distribution Unit
Connect the power supply
1. Using one of the supplied power cords, connect the female end to one of the input sockets on
the rear of the unit. Plug the male end into the UPS or other socket that provides protected
power.
2. To provide redundant power to the unit, use the remaining socket to connect to a second source
of protected power.
3. You may bundle and tie-wrap the cords to provide clearance for other components.
Note
If you are using a U-space for cable routing, use a brush guard panel to reduce air loss
through the opening.
Automatic
Input:
200-240 VAC
50/60 Hz
0.75A
Off
On
885-0476
Fan 1
Front
Off
On
Fan 2
Back
Input A: Primary Input B: Alternate
Push to Reset
Switch