Filter
Top Products
47
13. RS-232C SERIAL INTERFACE
The balance is a Data Communication Equipment (DCE) device. Connect the balance to a personal
computer (DTE) using a straight through cable.
Transmission system : EIA RS-232C (D-Sub 9-pin, female connector)
Transmission form : Asynchronous, bi-directional, half duplex
Transmission rate :
20 times/second, 10 times/second or 5 times/second (same as data refresh rate)
Data format : Baud rate : 600, 1200, 2400, 4800, 9600, 19200 bps
Data bits : 7 or 8 bits
Parity : Even, Odd (Data bits 7 bits)
None (Data bits 8 bits)
Stop bit : 1 bit
Code : ASCII
D-Sub 9-pin assignments
Pin No. Signal name Direction Description
1
-
-
No connection
2 TXD Output Transmit data
3 RXD Input Receive data
4
-
-
No connection
5 SG
-
Signal ground
6 DSR Output Data set ready
7 RTS Input Request to send
8 CTS Output Clear to send
9
-
-
No connection
Signal names of the balance side are the same as
the DTE side with TXD and RXD reversed.
0123456
LSB MSB
1
0
-5V to -15V
+5V to +15V
RS-232C
Stop bit
Parity bit
Start bit
Data bits
#4-40UNC
2
3
7
8
6
5
TXD
RXD
RTS
CTS
DSR
SG
RXD
TXD
RTS
CTS
DSR
SG
Approx.5V
Inside of balance
Balance side
DCE
Computer side
DTE
Terminals sample