Filter
Top Products
33
Class Item and Parameter Description
0
600 bps
1
1200 bps
2
2400 bps
3
4800 bps
4
9600 bps
bp5
Baud rate
5
19200 bps
0
7 bits, even
1
7 bits, odd
btpr
Data bit, parity bit
2
8 bits, none
0
CR LF
Crlf
Terminator
1
CR
CR: ASCII code 0Dh
LF: ASCII code 0Ah
0
A&D standard format
1
DP format
2
KF format
3
MT format
4
NU format
type
Data format
5
CSV format
Refer to “9-6 Description of the Item
“Data Format””.
0
No limit
t-Up
Timeout
1
1 second
Selects the wait time to receive a
command.
0
No output
5if
Serial
interface
erCd
AK, Error code
1
Output
AK:ASCII code 06h
mltMLT
Programmable-unit (Multi-unit)
Sets an arbitrary coefficient.
Available only when programmable-
unit mode is selected.
Unit
Unit
Refer to “4. WEIGHING UNITS”.
id
ID number
Refer to “10. ID NUMBER AND GLP REPORT”
0
Normal weighing mode
1
Capacity indicator
apf
Application function
2
Statistical calculation mode
0
Number of data, sum
1
Number of data, sum, maximum,
minimum, average, range
(maximum-minimum)
ap fnc
Application
5taf
Statistical function
mode output items
2
Number of data, sum, maximum,
minimum, average, range
(maximum-minimum), standard
deviation, coefficient of variation
:
Factory settings.
Caution
The balance may not transmit the data completely at the specified refresh rate, depending on
the baud rate.
When a refresh rate of 20 times/second is used, set the baud rate to 4800 bps or higher.