Filter
Top Products
Caring For Your Meter
Display Check
This verifies that all parts of
the display are working. Make
sure the meter is off. Press and
hold down the ON/OFF button.
The display should look exactly
like the picture at right. If it
does not, call Roche Diagnostics.
Cleaning
Clean the outside of the meter, as needed, using a soft
cloth that has been slightly dampened with one of the
following:
• 70% alcohol
•a solution of mild dishwashing liquid and water
• 10% household bleach solution (1 part bleach in 9
parts water) made fresh daily
• Sekupoudre
• Super Sani-wipes (Ammonium Chloride with alcohol)
Do not get moisture into the code key slot, test strip slot,
or the serial port.
Note to Healthcare Professionals:
Follow the infection control procedures
appropriate for your facility.
28