Editing a Voice
48
Owner’s Manual
Quick Guide Editing a Program
Assigning drum/percussion instruments to individual keys
In the Drum Voice Edit mode, you can create your own original drum kits by assigning specific instrument sounds to
individual keys — in any desired order — and edit detailed parameters for each key’s sound.
1
Call up the Key Edit display in the Voice Edit
mode.
Refer to step 3 on page 47.
2 Call up the [F1] OSC → [SF1] WAVE display.
3 Press the key to which you want to assign a
sound.
The drum instrument currently assigned to the
pressed key will sound.
4 Select the desired Waveform to be assigned.
Move the cursor to “Number” and change the
value by using the data dial, [INC/YES] button,
and [DEC/NO] button. Then, press the same key
set in step 3 again to confirm the selected
instrument sound.
5
Create your original drum kit by repeating steps 3
- 4.
6 Store the created drum kit as a Drum Voice
User memory.
The edited Voice can be stored in the Voice Store
mode. See page 50 for details.
[VOICE] → Drum Voice selection → [EDIT] → Key selection → [F1] OSC → [SF1] WAVE
TIP
