Effects Parameters 245
02R96—Owner’s Manual
REVERB 5.1
One input, six output reverb for 5.1 surround, with surround panning.
OCTA REVERB
Eight input, eight output reverb.
Parameter Range Description
REV TIME
0.3–99.0 s Reverb time
REV TYPE
Hall, Room, Stage, Plate Reverb type
HI. RATIO
0.1–1.0 High-frequency reverb time ratio
DIFF.
0.0–1.0 Reverb diffusion (left–right reverb spread)
DENSITY
0–100% Reverb density
HPF
THRU, 21.2 Hz–8.00
kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
DIV.
0–100%
Divergence determines how the front center signal is fed to
the Left, Right, and Center channels. When set to 0%, it’s
fed only to the Left and Right channels (i.e., Phantom Cen-
ter). When set to 50%, it’s fed equally to the Left, Right, and
Center channels. When set to 100%, it’s fed to only the
Center channel (i.e., Real Center).
ROOMSIZE
0.1–20.0 Size of simulated room’s reverb
POS L/R
L63–R63 Left/right listening position
POS F/R
F63–R63 Front/rear listening position
POS CTRL
OFF, NOR, INV
1
1. When set to NOR, the position can be set by using the Joystick so long as the SELECTED CHANNEL
PAN/SURROUND [EFFECT] button’s indicator is on. When set to INV, the Joystick will work inverse-
ly. When set to OFF, Joystick control is off.
ER L/R
L63–R63 Left/right early reflections position
ER F/R
F63–R63 Front/rear early reflections position
ER LVL
0–100 Early reflections level
ER CTRL
OFF, NOR, INV
1
REV L/R
L63–R63 Left/right reverb position
REV F/R
F63–R63 Front/rear reverb position
REV LVL
0–100 Reverb level
REV CTRL
OFF, NOR, INV
1
Parameter Range Description
REV TIME
0.3–99.0 s Reverb time
REV TYPE
Hall, Room, Stage, Plate Reverb type
INI. DLY
0.0–100.0 ms Initial delay before reverb begins
HI. RATIO
0.1–1.0 High-frequency reverb time ratio
LO. RATIO
0.1–2.4 Low-frequency reverb time ratio
DIFF.
0.0–1.0 Reverb diffusion (left–right reverb spread)
DENSITY
0–100% Reverb density
HPF
THRU, 21.2 Hz–8.00
kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
E/R BAL.
0–100%
Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
