Effects Parameters 229
02R96—Owner’s Manual
PHASER
Two input, two output 16-stage phaser.
AUTOPAN
Two input, two output autopanner.
Parameter Range Description
FREQ.
0.05–40.00 Hz Modulation speed
DEPTH
0–100% Modulation depth
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
OFFSET
0–100 Lowest phase-shifted frequency offset
PHASE
0.00–354.38 degrees Left and right modulation phase balance
STAGE
2, 4, 6, 8, 10, 12, 14, 16 Number of phase shift stages
LSH F
21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G
–12 to +12 dB Low shelving filter gain
HSH F
50.0 Hz–16.0 kHz High shelving filter frequency
HSH G
–12 to +12 dB High shelving filter gain
SYNC
OFF/ON Tempo parameter sync on/off
NOTE
1
1.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
FREQ.
0.05–40.00 Hz Modulation speed
DEPTH
0–100% Modulation depth
DIR.
1
1. L<->R, L—>R, L<—R, Turn L, Turn R
Panning direction
WAVE
Sine, Tri, Square Modulation waveform
LSH F
21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G
–12 to +12 dB Low shelving filter gain
EQ F
100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G
–12 to +12 dB EQ (peaking type) gain
EQ Q
10.0–0.10 EQ (peaking type) bandwidth
HSH F
50.0 Hz–16.0 kHz High shelving filter frequency
HSH G
–12 to +12 dB High shelving filter gain
SYNC
OFF/ON Tempo parameter sync on/off
NOTE
2
2.
Used in conjunction with TEMPO to determine FREQ.
