SPARC Enterprise M4000/M5000 Servers Product Notes 21
RTIF1-
070914-019
When you use a user account which is not the
user account when you performed the LDAP
configuration and execute the showldap(8)
command with the -c option to display the
LDAP configuration, "Permission denied"
occurs. And on the XSCF Web, when you
display the LDAP configuration, the pop-up
screen displays no data.
Use the user account which used when you
performed the LDAP configuration.
RTIF1-
070914-020
On the User Account setting page on the User
Manager screen, after the password change
resulted in "Change Password Error," when
you click on the REFRESH button, there
appears the error message "No user. The
request is aborted."
To change the password, select User Manager
on the Menu again.
RTIF1-
070914-021
During the Open BootPROM process, when
you power off the domain, the error log of
Domain hang-up detected (level3) may be
registered.
This error log can be safely ignored.
RTIF1-
070914-023
When you specify the domain ID or XSB
number which are not supported on the
machine, there appears the parameter error
message.
To specify the available domain ID or XSB
number on the machine.
RTIF1-
070914-024
When you display the physical tree on the
XSCF Web, the warning mark is displayed on
the link card for External I/O expansion unit.
None available at this time.
RTIF1-
070914-026
The XSCFU cannot act as a reliable NTP source
for domains.
All domains should be configured to use a
NTP source other than the XSCFU.
RTIF1-
070915-001
On the Domain Configuration screen, when
you newly define the Domain Component List,
the parameter error may be displayed.
When you define the Domain Component List,
use CLI.
TABLE 5 XCP Issues and Workarounds (Continued)
ID Description Workaround
