SPARC Enterprise M4000/M5000 Servers Product Notes 19
RTIF1-
070914-005
On the XSCF Web, when using Internet
Explorer 7, on the User Accounts screen, User
Local Accounts doesn't show the Status of each
user.
None available at this time.
RTIF1-
070914-006
When you set the XSCF user account name to
the maximum 32 characters, you can log in,
but then, when you execute the XSCF Shell or
operate the XSCF Web, "Permission denied"
occurs.
Use up to 31 characters to set the XSCF user
account name.
RTIF1-
070914-007
On the XSCF Web, when you use Internet
Explorer and select Log Archives, the Status of
Log Archiving screen doesn't show the status
information.
None available at this time.
RTIF1-
070914-008
On the XSCF Web, when you select POP or
SMTP-auth on the SMTP screen to enter
Password, the input value doesn't appear as
"*".
None available at this time.
RTIF1-
070914-009
On the XSCF Web, when selected POP or
SMTP-auth on the SMTP screen, the setting
can be done while the input field remains
blank. And despite the setting done, the past
setting data appears.
None available at this time.
RTIF1-
070914-010
On the XSCF Web, on the SNMPv3 Security
Settings screen, when you select Add User or
Copy User of the SNMP User-Based Security
Model (USM), the Create or Copy User screen
appears as a pop-up. On this screen, when you
set the SNMP User with 16 digits or more, it
will be registered correctly but the web
browser screen displays up to 15 digits.
When you set the SNMP User with 16 digits or
more, use the showsnmpusm(8) command.
RTIF1-
070914-011
On the XSCF Web, on the SNMPv3 Security
Settings screen, when you select Change
Password of the SNMP User-Based Security
Model (USM), the Change Password screen
appears as a pop-up. On this screen, despite
the "Confirm Password" is a field which must
be entered, it is not displayed with the note "*
Indicates require field."
Do not fail to set Confirm Password which is a
field must be entered.
TABLE 5 XCP Issues and Workarounds (Continued)
ID Description Workaround
