16
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the Left soft key ( ) and the Right soft key ( ).
Left Soft Key
Some functions of the left soft key are as follows.
• In standby mode, press the MENU (left) soft key ( ) to open the main menu.
• When the left soft key function is Edit, press the Edit (left) soft key ( ) to edit a
Contact.
• When the left soft key function is MENU, press the MENU (left) soft key ( ) and a
pop-up menu appears.
Right Soft Key
Some functions of the right soft key are as follows.
• In standby mode, press the CONTACTS (right) soft key ( ) to open the Contacts
List screen.
• When the right soft key function is Check, press the Check (right) soft key ( )
to select an item in a list to be acted on by a selected function, such as Delete.
Helio Key
• In a menu, press the Helio key ( ) to accept the highlighted selection.
• In camera mode, press the Helio key ( ) to take a photo.
• When the Helio key function is Edit, press the Edit (Helio) key ( ) to edit a Draft
message.
Back/Clear Key
The Back/Clear key ( ) is used to erase or clear numbers, text, or symbols
from the display. You can also use the key to return to a previous menu or to
return to standby mode from any menu.
1. If you enter an incorrect character, briefly press to backspace (and
delete) the character.
2. To back up one menu level, briefly press .
3. To return to standby mode, repeatedly press until you return to
standby mode.
